Freeway Horse Floats Limited

Page URL:	http://www.freewaytrailers.co.nz/horse_trailers/angle_carrier/
Date Printed:	Wednesday, 8 September, 2010

Angle Carrying Horse Trailer

Angle carrying horse trailer with features as listed below:

DOUBLE ANGLE CARrying horse trailer - 3.8 metre length has .8 metres from the centre of the angled door to the centre of the curved front. 4.5 metre length has 1.3 metres from the centre of the angled door to the centre of the curved front. 5.0 metre length has 1.8 metres from the centre of the angled door to the centre of the curved front. Barn doors – step up, turn around, step out – seals off the rear of the float, making it fully lockable 2 side windows for extra ventilation Padding on the dividers and front angled wall Chassis is hot dipped galvanised to prevent rust The galvanised steel frame work is powder coated to the colour of your choice in a hot oven to give a smooth, hard finish Electronic vehicle operated braking system (for two larger models) Non-slip rubber matting glued and sealed to the galvanised steel floor in one piece Rubber glued to the horse kick areas Recessed area for the front horse (rubbered out) Solid fibreglass moulded roof – no steel re-enforcing which after a while cracks away from the fibreglass Large top quality jockey wheel The horse bay widths are 0.8 metres and are adjustable The unit is 400 mm wider than the standard loading systems (standard double and deluxe) They have an unladen weight of around 1200 kgs and a tow rating of 3500 kgs (depending on size)  Recommended tow vehicle is a Toyota Landcruiser, Nissan Patrol or similar. Adjustable dividers Aluminium cabinet attached to the rear barn door Cover shelf TRIPLE  ANGLE CARrying horse trailer - 4.5 metre length has .8 metres from the centre of the angled wall to the centre of the curve in front. 5.0 metre length has 1.3 metres from the centre of the angled wall to the centre of the curve in front. 5.5 metre length has 1.8 metres from the centre of the angled wall to the centre of the curve in front. Barn doors – step up, turn around, step out, very safe – seals off the rear of the float, making it fully lockable 2 side windows for extra ventilation Padding on the dividers and front angled wall Chassis is hot dipped galvanised to prevent rust The galvanised steel frame work is powder coated to the colour of your choice in a hot oven to give a smooth, hard finish Electronic vehicle operated braking system Non-slip rubber matting glued and seal to the galvanised steel floor in one piece Rubber glued to the horse kick area Recessed area for the front horse (rubbered out) Solid fibreglass moulded roof – no steel re-enforcing which after a while cracks away from the fibreglass Large top quality jockey wheel LED lights - upper and lower The horse bay widths are 0.8 metres and are adjustable The unit is 400 mm wider than the standard loading systems (standard double and deluxe) They have an unladen weight of around 1500 kgs and a tow rating of 3500 kgs depending on size Recommended tow vehicle is a Toyota Landcruiser, Nissan Patrol or similar.

Small kitchen Bunk above divan Shower in horse bay

Optional Extras:

Aluminium tack cabinet attached to the rear barn door, great storage capacity 4 m awning to shelter out of the rain and sun Kitchen with front cabinet, bench, sink etc, can have saddle racks Gas fridge to keep the champagne, milk etc cool! Gas cooker if you want to do cooking! 81 L water tank with high pressure pump, hose and fittings Font for hot water, shower, curtain, rail etc - you won’t have to wait in line for a shower Battery power (deep cell available) gives you that independence Gas bottle, mounting, plumbing etc if you have a fridge, font or cooker Bunk mounted above divan – quite comfortable, holds sleeping bag and pillow when hinged back. Small divan with or without squab and back pad, this is extra storage for battery, boots, cleaning gear etc Cover rack and nik nak rack above front window for champagne glasses, coffee, tea, sugar, mugs, bandages etc Wardrobe for your jackets Tight chains for topping and tailing Muck mats to keep that side of the float clean Hay rack attached to outside of barn door – the hay will need to be in a plastic bag to avoid exhaust fumes Coupling cover to keep the coupling etc out of the weather Rug drying rack inside the float Loading light at rear of float if you need to load or unload at night Extra lights both internal and external Upper tail lights for safety from the rear Trailer caddy attached to the side door for shampoo, brushes etc Coupling lock Back to top